Vivitar 3D DIGITAL CAMCORDER DVR 790HD User Manual
Page 49
48
Select “No” to exit without formatting.
Select “Yes” and press the SET button to begin the format.
The memory card will be completely formatted.
Firmware (Factory Default Settings) Menu
(3D and 2D Image Capture)
Use this menu to view the Firmware version on your camera or to reset your camera settings to
the Factory Default Settings.
1)
Press the SET button to open the menus for the current mode.
2)
Push the joystick button LEFT or RIGHT to scroll and select the Firmware menu.
3)
The “Default Setting” is selected.
4)
Press the SET button to reset the camera to the factory default settings.
5)
You will be asked to confirm the resetting to the factory default settings.
Select “No” to exit the menu and return to the previous mode without resetting to the
default settings.
Select “Yes” and press the SET button to proceed with the reset.
You will then automatically exit the menu and return to the previous mode with the digital
camcorder settings set to the Factory Default Settings.
Note: After RESETTING to the default settings, it is recommended to select your system
Language, Date/Time and ViviLink for Photos and Videos. If you do not, the next time your
camera is powered on, you will be prompted to define those settings.