Vivitar 3D DIGITAL CAMCORDER DVR 790HD - Manual (Page 56)

55
Connecting the Camcorder to a TV and HDTV
Connecting the Camcorder to the TV
The camcorder has an AV port to use your larger TV screen in place of the camera
‟s LCD screen.
On plugging the TV-out cable (supplied) to the cameras AV out jack, the LCD screen turns blank.
Use the camcorder as you would to capture and playback photos and videos. The images appear
on the TV instead of on the LCD screen.
Note: The only limitation of using the TV screen is that the camcorder is now not portable.
1) Connect the camcorder to a TV via the TV-out cable (supplied).
2) Turn on the TV and the camera, and then set the
TV to “AV” mode.
3) You will need to set the TV format on the camera to suit the TV format of your TV set.
4) Make sure the camcorder is set to the correct TV Output setting. On plugging in the TV out
cable a message will appear on the LCD screen to select NTSC or PAL for the type of TV you
are using.
5) Select the option as per the format of the TV set you are using and press the SET button.
6) When the camera is set to record mode, you can preview the subjects you want to record on
the TV screen.
7) When the camera is set to Playback mode, you can review all the photos and videos stored in
the Micro SD Memory card on the TV.
Connecting the Camcorder to the HDTV
To view the high resolution quality videos recorded with your camera, connect the camcorder to
an HDTV with the HDMI (not included, purchased separately).
On plugging the HDMI cable to the camera‟s HDMI port, the LCD screen turns blank. Use the
camera as you would to capture and playback photos and videos. The images will appear on the
HDTV instead of on the LCD screen.
Note: The only limitation of using the HDTV screen is that the camera is now not portable.
1) Connect the camera to an HDTV with the HDMI cable.