Vizio Z WAVE TZEMT400AB32MAA - Manual (Page 21)

Sensor Calibration
27
Sensor Calibration
The Sensor Calibration screen allows you to change the temperature calibration of the internal temperature sensor. You
can change the temperature calibration by +/- 7 degrees.
When the Sensor Calibration screen is selected it will show the current temperature calibration (The (75) in the example
screen below) and the current number of degrees of offset being applied (1 deg in the example). If the sensor’s actual
temp is (74) with 0 degrees of offset and you want it to be 75, then press “+” to add 1 deg and it will show (75).
To change the temperature calibration, use the scroll buttons to select the internal or a remote sensor. Once selected, use
the + and – buttons to change the temperature calibration to the desired setting.
The value shown in the (xx) is the calibrated or offset temperature that you want the sensor to show.
When you close this screen, it may take a few seconds for the temperature displayed on the main thermostat screen to
update to the new temperature.
Sensor Calibration Screen
Sensor
Calibration
Internal (75) 1
Don
e
+
Screen navigation buttons:
Done
+
Return to Main Menu Screen
Increase the temperature by 1 deg
Decrease the temperature by 1 deg
Refresh screen temperatures