Vizio Z WAVE TZEMT400AB32MAA - Manual (Page 6)

Thermostat User Guide
6
User Settings Screen
This screen is a submenu of user settings for the initial setup of the thermostat. You can set the clock, minimized screen
timeout, Fahrenheit or Centigrade selection, sensor calibration and display settings.
Usage Graph
Shows daily heating and cooling runtime hours for a week.
ESM Setpoints
This screen is a submenu of the Energy Savings Mode settings. You can set the heating and cooling setpoint setback
temperatures. These settings are used when the thermostat is in the ESM mode.
ZWave Install
This screen is a submenu for installing the thermostat into a Z-Wave network. When the Z-Wave network controller is
ready to install the thermostat, press the YES button to install.
Thermostat Info Screen
This is a quick reference list of the thermostat firmware versions, Z-Wave network addresses and HVAC system setup.