Vizio Z WAVE TZEMT400AB32MAA - Manual (Page 7)

7
Thermostat Control Screen
72
MODE
FAN MENU
77 H
Sys Off
Run
Filter
10:25 AM
RUN
74 C
The main Thermostat Control Screen is the default display screen and is the screen that is normally displayed on the
Thermostat.
Temperature Display
The Thermostat will display the current temperature from the internal temperature sensor.
Setpoint Display
The heating and cooling setpoints are displayed next to the Setpoint Up/Down buttons. In the HEAT mode, the Up/Down
buttons change the heat setpoint. In the COOL mode, they change the cooling setpoint. When in AUTO mode, the buttons
change the last call’s heating or cooling setpoint. Note that the setpoints will “push” each other if they are adjusted to get
within the minimum Heat/Cool separation setting. This is normally 3 degrees.
Clock Display
The current time is displayed in the upper left corner of the main screen. Set the clock from the User Settings Menu.
The time will blink when the clock has not been set.