Document Outline

• TOSHIBA QUALITY IS SECOND TO NONE
• PREFACE
  • Features of the e-STUDIO210c/310c
• TABLE OF CONTENTS
• PRECAUTIONS
  • 1. Installation
  • 2. General Precautions
• FORGERY PREVENTION FUNCTION/ STORAGE OF COLOUR COPIES
• 1. BEFORE MAKING COPIES
  • 1. DESCRIPTION OF THE DIGITAL COLOUR COPIER AND THE OPTIONAL EQUIPMENT
    • Main Components
    • Optional Equipment
    • Control Panel
    • Touch Panel
  • 2. TURNING ON THE POWER SWITCH
    • Controlling the Use of the Copier with Access Codes
    • Controlling the Use of the Copier Using the Optional Key Copy Counters
  • 3. ENERGY-SAVING FUNCTIONS
• 2. HOW TO MAKE COPIES
  • 1. GENERAL COPYING PROCEDURES
  • 2. SETTING COPY PAPER
    • Acceptable Copy Paper Types and Sizes
    • Recommended Paper/Handling and Storing Paper
    • Changing the Paper Size of the Cassette / Setting the Cassette for Special Uses
  • 3. SETTING ORIGINALS
    • Acceptable Original Types and Sizes
    • When Placing an Original on the Glass
    • When Using the Reversing Automatic Document Feeder (optional)
  • 4. AUTO JOB START (JOB PRESET)
    • During Warming up
    • During Copying
    • During Printing (optional)
  • 5. INTERRUPT COPYING
  • 6. CANCELLING/RESUMING A COPY OPERATION
• 3. SETTING OF BASIC COPY MODES
  • 1. PAPER SELECTION
    • Automatic Paper Selection (APS)
    • Manual Paper Selection
  • 2. REDUCTION AND ENLARGEMENT COPYING
  • 3. DUPLEX COPYING (1-SIDED, 2-SIDED, BOOK-TYPE)
  • 4. COPY DENSITY ADJUSTMENT
  • 5. COLOUR MODE
  • 6. ORIGINAL MODE
• 4. COLOUR EDITING AND ADJUSTMENT
  • 1. MONOCOLOUR COPYING
  • 2. HUE ADJUSTMENT
  • 3. SATURATION
  • 4. COLOUR BALANCE (YMCK ADJUSTMENT)
  • 5. RGB ADJUSTMENT
  • 6. ONE-TOUCH ADJUSTMENT
  • 7. BACKGROUND ADJUSTMENT
  • 8. SHARPNESS ADJUSTMENT
• 5. USING THE EDITING FUNCTIONS
  • 1. IMAGE SHIFT
  • 2. EDGE ERASE
  • 3. BOOK CENTRE ERASE
  • 4. DUAL-PAGE
  • 5. FULL IMAGE
  • 6. 2 IN 1 / 4 IN 1
  • 7. MAGAZINE SORT (FROM THE EDITING MENU)
  • 8. X-Y ZOOM
  • 9. IMAGE EDITING
    • Trimming/Masking
    • Mirror Image
    • Negative/Positive Reversal In the full colour mode, this function allows you
  • 10. CENTRING
  • 11. IMAGE REPEAT
• 6. USING THE SPECIAL FUNCTIONS
  • 1. CONTINUOUS ORIGINAL FEEDING / SINGLE ORIGINAL FEEDING
  • 2. MIXED-SIZED ORIGINALS
  • 3. BYPASS COPYING
    • Bypass Copying on Standard Size or A3-wide Paper
    • Bypass Copying on Non-standard Size Paper
    • Special Paper such as Thin Paper/Thick Paper/OHP Films/Sticker Labels
  • 4. MODE MEMORY
  • 5. SETTING THE “OTHER” SIZE KEY
  • 6. USER SELECTION (INITIAL SETTINGS)
  • 7. WEEKLY TIMER
  • 8. SETTING THE DATE AND TIME
  • 9. TOTAL COUNTER
  • 10. DEPARTMENT MANAGEMENT
    • Printing an Access Code List
    • Setting Access Codes (Registration/Change/Deletion)
    • Resetting Counters
  • 11. AUTOMATIC CALIBRATION
  • 12. SWITCHING BETWEEN LANGUAGES
  • 13. SETTING THE ENERGY SAVING MODE
  • 14. SETTING THE OFF-MODE (AUTO SHUTOFF)
• 7. SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS)
  • 1. FINISHING MODES AND FINISHERS (OPTIONAL)
  • 2. SORT/GROUP COPYING
  • 3. STAPLE SORTING
  • 4. MAGAZINESORT&SADDLE STITCHINGMODE(BOOKLETMODE)
  • 5. HOLE PUNCHING MODE
• 8. NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
  • 1. SCANNING THE IMAGE DATA
    • Scan Setting on the Touch Panel
    • Touch Panel during Scanning
  • 2. SHUTTING DOWN THE POWER SUPPLY TO THE PRINTER CONTROLLER
• 9. WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
  • 1. DESCRIPTION OF THE FLASHING GRAPHIC SYMBOLS
  • 2. ADD PAPER SYMBOL
    • Adding Paper to the Cassettes
    • Adding Paper to the Large-Capacity Feeder (optional)
  • 3. REPLACE TONER CARTRIDGE SYMBOL
  • 4. REPLACE TONER BAG SYMBOL
  • 5. CLEAR PAPER SYMBOL
    • ①Reversing Automatic Document Feeder (optional)
    • ②Cassette Feeding Area
    • ③Large-Capacity Feeder (optional)
    • ④Bypass feed unit
    • ⑤Inside of the Copier
    • ⑥Automatic Duplexer (optional)
    • ⑦Hole Punch Unit (optional)
    • ⑧Finisher (optional)
    • ⑨Saddle Stitch Unit (optional)
  • 6. ADDING STAPLES (OPTIONAL)
  • 7. REMOVING JAMMED STAPLES (OPTIONAL)
  • 8. CLEARING ACCUMULATED PUNCHED PAPER BITS (OPTIONAL)
  • 9. CALL SERVICE SYMBOL
  • 10. PERIODIC MAINTENANCE MESSAGE
• 10. MAINTENANCE
  • 1. DAILY INSPECTION
  • 2. SIMPLE TROUBLESHOOTING
• 11. SPECIFICATIONS & OPTIONS
  • 1. e-STUDIO210c/310c SPECIFICATIONS
  • 2. SPECIFICATIONS OF OPTIONS
  • 3. PACKING LIST
  • 4. COPYING FUNCTION COMBINATION MATRIX
  • 5. IMAGE QUALITY ADJUSTMENT COMBINATION MATRIX
  • 6. INDEX