VocoPro DVG-399K - Manual (Page 16)

15
Initial Playback
Getting ready to play
--Turn on the TV and set its video source to the channel that the DVG-399K is connected to (VIDEO 1, Video 2, AV 1,
etc.)
--Turn on the audio equipment connected to the unit. Set its input source to the channel that the DVG-399K is
connected to.
1. Press POWER
When the unit turns on you will see LED activity in the display panel and see the VocoStar splash screen
on your TV.
2. Press OPEN/CLOSE to open the DVG-399K’s disc tray.
3. Loading a DISC
Place a disc in the disc tray with the label side facing up.
4. Press OPEN/CLOSE to close the disc tray
After the disc tray closes, the disc will automatically start playing. If it does not auto-start, press PLAY.
When the menu screen is displayed:
The menu screen may be displayed first after loading a DVD, which contains a menu. Use the (< ^ > v) to
select the title/chapter that you want to view, then press PLAY/ENTER to start playback.
To stop playback:
Press the STOP button.
Discs will continue to spin while the menu screen is displayed. When you are finished using the DVG-399K turn the
power off or put it in STANDBY mode by pressing the STANDBY button on the remote.
Pausing playback
Press PAUSE during playback. To return from pause, press the PLAY or PAUSE button.
Basic operations