VocoPro DVG-399K - Manual (Page 26)

25
Problem
No Sound
The remote control does not
work properly or at all
Possible Cause
- Are the audio connections firmly at-
tached and correctly connected?
- Is the connected audio equipment
turned on? Is the volume set correctly?
- Are the remote control batteries in-
stalled correctly?
- The remote control may be too
far from the DVG-399K?
- Is there something in the way
- The batteries may be low
Solution
- Consult the “Getting Connected” sec-
tion of this manual and try reconnecting
the video connections.
- Make sure any speakers, amps,
mixers, etc. are turned ON and their
volume is up.
- Check battery polarities and make
sure that ( + ) is lined up with ( + ) and (
- ) is lined up with
( - ).
- Get within the recommended operating
range of the remote control.
Remove any obstacles and make sure
that the remote is pointed directly at
the remote sensor.
- Change the batteries
Troubleshooting cont