VocoPro DVG-399K - Manual (Page 9)

8
Connecting to a Dolby Digital/DTS Receiver/Decoder
Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable, connect one
end to the appropriate jack on the DVG-399K (Coaxial or Optical) and the other end to the appropriate jack on the
AC-3 decoder/receiver (Coaxial or Optical). If you have both coaxial and optical inputs on your AC-3 decoder/receiver,
it is recommended to use an optical connection as those cables eliminate the possibility of EMI (electromagnetic in-
terference). If your Dolby Digital Receiver does not have a built-in AC-3 decoder, and has 5.1 channel RCA inputs, you
can use the 5.1 channel output jacks on the DVG-399K. Either method will provide for AC-3 decoding.
Connecting both Analog and Digital Audio
To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs or refer to the instructions below
for each connection (digital and analog).
VIDEO CONNECTIONS
Connecting to a TV with S-video
Using an S-Video cable, connect one end to the DVG-399K’s S-VIDEO OUTPUT jack and connect the other end to the
S-VIDEO IN jack on your television.
Getting connected cont
Connecting both Analog and Digital Audio
POWER
STAND BY/ON
MIC MASTER VOLUME
MALE
ECHO DELAY FEEDBACK EFFECT MODE MODE CHANNEL LANGUAGE INPUT BASS TREBLE DSP MODE MEMORY RECALL CALL
FEMALE
KARAOKE
MASTER MENU
MUSIC VOLUME
MIC IN
b # AUTO DISPLAY AUTO
DTX-9900
Connecting to a Dolby/Digital/DTS/Receiver/Decoder
POWER
STAND BY/ON
MIC MASTER VOLUME
MALE
ECHO DELAY FEEDBACK EFFECT MODE MODE CHANNEL LANGUAGE INPUT BASS TREBLE DSP MODE MEMORY RECALL CALL
FEMALE
KARAOKE MASTER MENU
MUSIC VOLUME
MIC IN
b # AUTO DISPLAY AUTO
DTX-9900
Receivers
DTX-9900K Digital
Karaoke Mixer/Amp
DTX-9900K Digital
Karaoke Mixer/Amp
Connecting both Analog and Digital Audio
POWER
STAND BY/ON
MIC MASTER VOLUME
MALE
ECHO DELAY FEEDBACK EFFECT MODE MODE CHANNEL LANGUAGE INPUT BASS TREBLE DSP MODE MEMORY RECALL CALL
FEMALE
KARAOKE MASTER MENU
MUSIC VOLUME
MIC IN
b # AUTO DISPLAY AUTO
DTX-9900
Connecting to a Television with S-Video
S-Video
NOTE: When using the S-Video output, the DVG-399K’s
video mode must be set to “S-VIDEO” in the SYSTEM
SETUP screen. You can access this screen by pressing
SETUP on your remote. The “VIDEO” option can be found
in the “SYSTEM SETUP” page. See the SETTING UP
PREFERENCES section of this manual for further
instructions.
Television