VocoPro DVG-399K - Manual (Page 22)

21
DIGITAL SETUP
1. OP MODE
LINE OUT: This is the standard Digital Output setting.
RF REMOD: When primarily using headphones.
2. DYNAMIC RANGE
This selects the Line Out ratio.
NOTE: This can only be used when LINE OUT is chosen
in the OP MODE options.
FULL: The audio signal peak value will be the minimum
OFF: The audio signal peak value will be the maximum.
3. DUAL MONO
Here you can choose between STEREO, L-MONO, R-MONO,
or MIX-MONO output modes. It is usually recommended that
you stay in STEREO mode for best results.
Setting up preferences cont