Visioneer DP1011 - Manual (Page 17)

Xerox DP1011 User’s Guide 12
User Controls
User Controls
Panel Control and Remote Control
The buttons on the Panel Control and the Remote Control are for
controlling the projector’s functions.
Panel Control
Power/Standby Indicator—Flashes green during power startup;
remains steady green when projector is ready.
Warning Indicator—Turns red when projector is overheated,
flashes red when the projector has a lamp problem or internal
problem, flashes orange when high-speed cooling is in progress.
Power—Turns projector power on and off. See “Powering On/Off
the Projector” on page 8 for the specific power on/off sequences.
Source—Selects type of video source: RGB, Component-p,
Component-i, S-Video, Composite Video, or HDTV.
Enter—When menus are displayed, confirms your selection of
items on the menus.
Directional Select Keys ( )—When menus are displayed,
selects items or adjusts settings of items.
Keystone—Adjusts image distortion caused by tilting the projector
(+/- 16 degrees).
Menu—Opens the On-Screen Display (OSD) menus. To close the
OSD, press the Menu button again.
Power/Standby
Indicator
Warning
Indicator
Directional Select Keys