Visioneer DP1011 - Manual (Page 23)

Xerox DP1011 User’s Guide 18
User Controls
Adjust the Video Image
1. Press the Menu button on the Remote Control or Panel Control
to open the OSD.
2. Select the Video Image menu and press the Enter button.
The Video Image menu appears.
3. Use the keys to select the item you want, and use the
keys to adjust the selected setting.
4. When the new settings are what you want, press the Menu
button again.
Color Saturation—Adjusts the video image from black and white
to fully saturated color. The higher the number, the greater the
color saturation.
Sharpness—Adjusts the sharpness of the image. The higher the
number the sharper the image.
Tint—Adjusts the color balance of red and green. Decreasing the
tint, increase the amount of green in the image. Increasing the tint
increases the amount of red in the image.
Reset This Menu—Resets the projector’s display settings to their
original factory settings. Select Yes to reset the menu.