Vuzix VA370M - Manual (Page 32)

VIZIO VA370M User Manual
32
www.VIZIO.com
If your Time Zone observes the daylight
savings, the next display will give the choice
to select or no select it. Highlight your choice
and press MENU/SELECT button to confirm
your selection.
8. At this point if you have an outdoor antenna
or use a cable service (No set-top box), the
signal source can be selected.
Press # or $ to select your input source
(Antenna
or Cable), then press
MENU/SELECT button to confirm it. The
scanning of the channels will start.
NOTE: Select Cable only if you receive
your cable service without a set-top box.
9. The Channel Scan progress screen opens if
you selected Scan. At this point if you are
using a cable or satellite set-top box, please
press MENU/SELECT button to exit this
process and use your cable box to select the
channels.
Note: If you select Stop Scan, you can scan channels
at a later time by selecting Channels menu, and then
and select the Scan Channels option in the menu.
10. If you let the TV finishing the channel scan,
the next screen will give the option to continue.
11. At this point, you can either let the TV do the
final two steps automatically or press the
MENU/SELECT key to continue and finish this
procedure.
Note: DTV digital broadcast is not available in all areas. Refer to www.antennaweb.org to get information
about availability in your area, antenna types, and in which direction to point your antenna. The channel
availability through cable depends on which channels your cable operator supplies in Clear QAM. Consult
your cable operator for more information.