Vuzix VA370M - Manual (Page 40)

VIZIO VA370M User Manual
40
www.VIZIO.com
Adjusting Channels settings
If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has
changed, you can do so from the TV menu.
Press # / $ / ! / " to highlight and select the choice, then press MENU/SELECT key to select the
desired adjustment, and the press the EXIT key when finished making adjustments. Press ! to return to
the previous screen or repeatedly to exit the OSD.
The following options are available in the TV menu:
1. Master List - After your HDTV has stored all of the available channels in memory, you can skip
channels from the channel list that you do not want to see and which signals are not strong
enough to produce a good picture. You can still tune to skipped channels using the numbered
keys on the remote control.
2. Additional Scan - Turning this option On allows your HDTV to scan for additional channels if
Scan Channels had been interrupted.
3. Scan Channels - This option allows scanning for available channels in your local area; either
over the air (antenna) or cable service (no set-top box) is being used. After all of the available
channels have been scanned, they are placed in the master list.
4. Channel Name Edit - This option allows you either to edit the given name or to assign a new
name to the scanned channels, to your preference.
5. Time Zone - Setting the correct Time Zone for your area ensures that the correct program times
are shown in the Electronic Program Guide.
6. Daylight Saving - Setting the daylight saving time for your area will ensure that the correct
program times are shown in the Electronic Program Guide.