Front panel descriptions and functions – VocoPro DA-8909RV User Manual

Page 11

Advertising

7. SPEAKERS A/B - These buttons switch between 2 sets of SPEAKER OUTPUT.

8. LED GAIN - Select between a HIGH or FLAT LED display mode for different effect and visibility.

9. VOCAL CANCEL/VOCAL PARTNER - With Multiplex media, lead vocals and music are recorded in separate left
and right stereo channels. When VOCAL CANCEL is selected, the LED will illuminate and the lead vocal channel will
be removed, leaving only a duplicated instrumental track to left and right. When VOCAL PARTNER is pressed, LED
will illuminate and the vocal track will only be activated while there is no microphone input. In other words, while the
Karaoke singer is performing, the vocals will never drop entirely out, keeping the action going.

VOCAL ENHANCER - Because the DA-8909RV allows you to “TUNE” the frequency and mix, or “PROCESS” of your mi-
crophone output, it is a more powerful EQ tool than standard Bass and Treble controls.

10. VOCAL ENHANCER ON/OFF - This button activates or deactivates the VOCAL ENHANCER processor feature.
Try using this button to do an A/B comparison of a processed and unprocessed signal while someone sings into the
microphone. This is helpful for fine-tuning and system diagnostics.

11. HIGH - Similar to a Treble control, this boosts the HIGH frequencies in your EQ, from 0 to 10.

12. PROCESS - This control is similar to a Balance control for the EQ, where you can select between a mix predomi-
nantly “High end” mix and a bassier “Low end” mix.

13. TUNE - This control allows you fine tune specific frequencies more precisely, by setting the lower cutoff frequency
of the high-pass filter between 1kHz and 8kHz. Fortunately, you can still use it without understanding what that
means. The best way to use this control is by adjusting it while someone is singing into the microphone to find that
“sweet spot” where the EQ sounds clean (not harsh, without distortion) and well-balanced.

14. LOW - Similar to a Bass control, this boosts the LOW frequencies in your EQ, from 0 to 10.

15. LOUDNESS ON/OFF - For an instant Volume/Gain, the LOUDNESS button is an easy way to improve your mix when
you need an extra boost. Perfect for varying volume controls between tracks or singers.

MUSIC TONE controls

16. BASS/TREBLE - The BASS control adjusts the low end of your source music and the TREBLE
control adjusts the high end.

Front Panel Descriptions and Functions

��

��

��

�

��

��

��

��

��

��

��

�

��

��

�

��

Advertising

Popular Brands

Popular manuals