Front panel descriptions and functions – VocoPro DA-8909RV User Manual

Page 12

Advertising

17. POWER BUTTON - Use this button to turn the DA-8909RV ON or OFF.

18. REVERB VOLUME - Controls the output level of the reverb effect. Select between a range of 0 - 99% by
turning the control clockwise to increase the reverb output level and counter-clockwise to decrease the reverb
output level.

DIGITAL ECHO

19. DELAY - This control adjusts the length of time for each ECHO interval, or REPEAT. Rotating the DELAY control
clockwise will increase the DELAY, creating the effect of more “space.”

20. REPEAT - This control adjusts the number of ECHO repeats applied to the signal until the effect decays, or
fades out.

21. ECHO - This control is the overall level for the ECHO effect. Rotate clockwise to increase the amount of ECHO
effect applied to the signal, and counter-clockwise to decrease.

22. MIC TONE - The BASS control adjusts the low end of the microphone mix from MIC 1, 2
and 3, while the TREBLE control adjusts the high end of the mix.

23. MIC VOLUME - These level controls for MIC 1, 2 and 3 should be adjusted individually to get the best mix
when multiple performers are singing. Rotate clockwise to increase and counter-clockwise to decrease VOLUME
for each mic.

24. MIC 1, 2, 3 INPUTS - Connect your 1/4” cabled microphones here.

Front Panel Descriptions and Functions

��

��

��

�

��

��

��

��

��

��

��

�

��

��

�

��

Advertising

Popular Brands

Popular manuals