Rear panel descriptions and functions – VocoPro DA-8909RV User Manual

Page 14

Advertising

Rear Panel Descriptions and Functions

12. AUDIO INPUT - Use these inputs for connecting CD, CDG, AUX, DVD or other players and other music
sources using RCA cables. The labels here are for reference only. So, you can connect a cassette player
to the AUX input, for example, and get the same results.

13. PRE OUTPUT - These jacks are designed for connection to external power amplifiers. Output signals
from the PRE OUTPUT are sent before the DA-8909RV amplification stage. This allows you to power your
speaker system from a separate amplifier rather than the speaker output from the DA-8909RV.

14. EFFFECT LOOP - These jacks are necessary to carry the stereo signal for the DA-8909RV’s internal
effects to left and right channel output. The 2 Loop Bars which are already installed in the EFFECT LOOP
IN and OUT jacks of the DA-880VE allow the EFFECT LOOP to operate internally. However, if you wish to
bypass the internal effects, these jacks enable you to connect external effects devices to the DA-8909RV
in a stereo loop.

If you prefer to connect external effects, use RCA cables to connect from the EFFECT LOOP OUT jack
pictured here to your external effect unit EFFECT LOOP input, and then out from the component to the
EFFECT LOOP IN of the DA-8909RV. This creates a continuous stereo loop.

15. SPEAKERS OUTPUT A & B - You can connect up to 4 different speakers between SPEAKERS OUTPUT
A and B. Use ‘banana plug” style speaker cables for left and right of each pair. These can be powered
simultaneously or in individual pairs using the SPEAKERS A/B buttons on the front panel (#7).

16. AC POWER CABLE TERMINAL - Connect the included AC Power Cable here and the other end to an
electrical outlet.

17. FUSE - This plastic cover is the housing for the DA-880VE’s fuse. Use only FUSE type AC 6.3A, 250V
when replacing the fuse.

��

�

��

�

��

Advertising

Popular Brands

Popular manuals