VocoPro DTX-9909K - Manual (Page 19)

19
Connecting a CD or Tape Player (audio-only)
Use the CD and TAPE inputs on the rear panel to connect
audio-only devices (CD, Mp3, tape players) with RCA outputs.
��������������������
���������
�����������
Selecting the correct input channel:
Front panel: Press the INPUT button on the DTX-9909K
front panel until the correct input channel is displayed on
the screen.
Remote Control: Press the corresponding input button on
the remote control to access the correct input channel.
i.e. TAPE/COX button for the TAPE input channel or the
CD/COX2 button for the CD input channel.
Getting Connected cont.