VocoPro DTX-9909K - Manual (Page 20)

20
Digital Audio Options
The DTX-9909K allows you to utilize the premium sound
experience that digital audio offers by providing fi ve digital au-
dio inputs. A digital connection allows for an entirely digital
signal to be sent to, and decoded by the DTX-9909K. This
eliminates the need for an analog signal or conversion and
the subsequent loss in fi delity and quality. Take advantage of
the DTS or Dolby Digital capabilities of many DVDs and CDs
by using either of the two types of inputs found here and give
your home theater or KJ set up the digital edge.
DIGITAL OPTICAL – This input, also known as TOSLINK,
provides a digital connection through the use of a single-pin
fi ber optic cable.
DIGITAL COAXIAL – This input provides a digital connection
through the use of an RCA-style coaxial cable.
Note that both types of inputs are nearly identical in signal
quality, they are both available on the DTX-9909K to allow
fl exibility with your existing equipment. DIGITAL OPTICAL may
provide a stronger signal over a long distance connection,
but this is usually not a concern in most home theater and
KJ set ups.
Connecting a Player with Digital Optical Audio Out-
puts
There are 2 Digital Optical audio inputs on the DTX-9909K DT DT
rear panel: OPT1 and OPT2.
What you will need
• Player with a Digital Optical output
• Digital Optical cable
1. Connect one end of the Optical cable to the Optical audio
output on the player
2. Connect the other end of the Optical cable to either of the
Optical inputs on the DTX-9909K rear panel
3. Select the proper input channel on the DTX-9909K.
Select the DVD input channel for OPT1 and the AUX1
input channel for OPT2
NOTE: Make sure the player’s video is also
connected to the correct input channel
Matching up the Correct Video Input
OPT1 Video: When connecting a player’s audio to the
OPT1 input, make sure that player’s video is connected to
one of the video inputs on the DVD input channel.
OPT2 Video: When connecting a player’s audio to the
OPT2 input, make sure that player’s video is connected to
one of the video inputs on the AUX1 input channel.
Selecting the correct input channel:
Front panel: Press the INPUT button on the DTX-9909K
front panel until the correct input channel is displayed on
the screen.
Remote Control: Press the corresponding input button on
the remote control to access the correct input channel.
i.e. DVD/OPT1 button for the OPT1 input channel or the
AUX1/OPT2 button for the OPT2 input channel.
Getting Connected cont.