Viking InterWorks 56K - Manual (Page 12)

VIKING COMPONENTS 56K USB MODEM USER’S GUIDE
Windows 98 Software (Continued)
3. The next message that should appear in the “Add New Hardware Wizard” is
“Windows will search for new drivers in its driver database on your hard drive, and in
any of the following selected locations. Click Next to start the search.” Select “Floppy
disk drives.” With the “Viking USB Modem Installation Disk” still in the floppy drive,
click on the “Next” button.
Note: If the diskette was not included or lost, the drivers can be downloaded from
our Web site at: www.vikingcomponents.com
4. The next message should read “Windows driver file search for the device: Viking
USB Modem Board.” The bottom of the window will show your drive A:\ or diskette
drive as the location of the modems driver. The “Location of driver” should read,
“A:\USBMODEM.INF.” Click on the “Next” button.
Chapter 3 10