Viking InterWorks 56K - Manual (Page 29)

VIKING COMPONENTS 56K USB MODEM USER’S GUIDE
MNP 10 Commands (Continued)
Command Function
@M0 Select initial transmit level of -26 dBm.
@M1 Select initial transmit level of -30 dBm.
@M2 Select initial transmit level of -10 dBm.
@M3 - @M10 Select initial transmit level of -10 dBm.
@M11 Select initial transmit level of -11 dBm.
@M12 Select initial transmit level of -12 dBm.
@M30 Select initial transmit level of -30 dBm.
:E0 Disable the compromise equalizer.
:E1 Enable the compromise equalizer.
Initialization Strings
Command Function
+MS=12,1 V.90 preferred (K56flex will still work).
+MS=12,1,34667,56000
V.90 only (K56flex and V.34 disabled).
+MS=56,1 K56flex preferred (V.90 will still work).
+MS=56,1,34000,56000
K56flex only (V.90 and V.34 disabled).
+MS=11,1 Disable V.90 and K56flex, use V.34 (28.8/33.6).
Caller ID Commands
Command Function
#CID=0 Disable Caller ID.
#CID=1 Enable Caller ID with formatted presentation.
#CID=2 Enable Caller ID with unformatted presentation.
Chapter 6 27