VBrick Systems Portal Server ETV v4.1 - Manual (Page 46)

36 © 2007 VBrick Systems, Inc.
2. Type the new subfolder name in the text field, preceded by a forward slash, for example
/Bill/temp , and click
Submit
when done.
VBricks
All VBricks must be configured in ETV Portal Server before they can be managed and used
for scheduled events. (VBrick configuration is only required if you are using the
Scheduling
feature. Once configured, all VBricks in the system are shown on the following window. In
the ETV Portal Server, SAP (Session Announcement Protocol) announcements are sent to
the Portal Server by network-connected VBrick devices (encoders and/or decoders). The
Select VBrick
panel in the next screen shows VBrick appliances (encoders and decoders) that
have announced their presence on the network but have not been configured for use in ETV
Portal Server. (Note that if you delete a VBrick from the
Currently Configured VBrick List
,
it will not be shown as available until you logout and log back in to the Admin Console.)
T To add a VBrick configuration:
1. Go to
Global Settings > VBricks
.
2. Select
Add VBricks
and click
Submit
.