Pre l iminar y – Vidikron Vision 110 User Manual

Page 54

Advertising
background image

Installation

40

Vidikron Vision Model 110 Installation/Operation Manual

PRE

L

IMINAR

Y

3.

Secure the Anamorphic Lens Holder to the plate using the Hex Bolts/Washers (item #6)
and Yaw/X Adjustment Levers that you removed in Step 1.

4.

Use the Lens Mounting Screws to attach the Lens Adapter Ring (item #1) to the Pitch
Adjustment Yoke (item #2); see Figure 3-19. (Use the round, threaded holes on the yoke.)

5.

Use the Height/Y Adjustment T-Screws (item #3), Pitch Adjustment T-Screws (item #4)
and T-Nuts (item #9) to attach the Pitch Adjustment Yoke and Lens Adapter Ring to the
Anamorphic Lens Holder. The Yoke should be as close to the primary lens as possible.

6.

Attach the lens to the Lens Adapter Ring by threading it clockwise.

Figure 3-19. Attaching the Anamorphic Lens to the Lens Adapter Ring

Lens threads into ring

FO

CU

S

Advertising