How to install – Vivotek IP3111/IP3121 User Manual
Page 13
www.vivotek.com
T:
886-2-22404099
F:
886-2-22404097
12
How to Install
To easily fit into various environments, NetworKam automatically detects the attached interfaces and
configures itself to the best condition. Therefore users need not care how to select the network between
Ethernet and modem, and whether the Ethernet speed is 10Mbps or 100 Mbps. The high performance
built-in CCD and lens always give users delicate image quality.
NetworKam supports Ethernet and modem interfaces according to the user's existing network. Ethernet
can provide higher bandwidth to achieve the best performance while dial-up network with modem is more
common in current Internet applications. Refer to the related installation section for your network
environment. If both interfaces are available, Ethernet is recommended and will be chosen as the first
priority if Ethernet cable and modem are concurrently attached. Managing to install in the other interface
will automatically clear the previous network settings to start new installation.
In the following content, "user" refers to those who can access NetworKam and "administrator" means the
supervisor who has the root password to configure NetworKam in addition to general access.
Administrators should carefully read this manual, especially during installation.