Vivotek IP3111/IP3121 - Manual (Page 44)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
43
System parameters
To change the system name, type in the text box after "Host Name". This name will be displayed at the
top of the main page. In the case that only the host name is changed, without adjusting date and time of
NetworKam, click on "Keep current date and time".
There are three ways to adjust system date and time. The easiest is to make NetworKam "sync with
computer time". The second is to set the date and time manually. Notice the format in the related field
while typing. The third is to make NetworKam automatically synchronize with timeservers over the
Internet whenever NetworKam starts up. It may fail if the assigned NTP server cannot be reached or it is
within a local network. Leaving the NTP server blank will let NetworKam connect to default timeservers.
If some specific timeserver is assigned, type it in the text box. Domain name or IP address format is
acceptable as long as DNS server is available. Do not forget to set the "Time Zone" offset for local
settings. It only affects the hour in NTP method. Click on to validate changes.