Vivotek IP3111/IP3121 - Manual (Page 84)

www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097
83
inter <integer> seconds delay to capture post-event
dihigh < not required > set DI high as trigger condition
dilow < not required > set DI low as trigger condition
dirise < not required > set DI rising as trigger condition
difall < not required > set DI falling as trigger condition
motion1 < not required > set motion window1 as trigger condition
motion2 < not required > set motion window2 as trigger condition
motion3 < not required > set motion window3 as trigger condition
ioalarm < not required > trigger DO when DI condition matched
mdalarm < not required > trigger DO when motion detected
ioupload < not required > upload snapshot when DI condition matched
mdupload < not required > upload snapshot when motion detected
sinter <integer> seconds interval for sequential mode
sbegin <hh:mm:ss> time to start sequential mode
send <hh:mm:ss> time to stop sequential mode
Homepage layout configuration URL
URL: /setup/layout.cgi
NAME VALUE DESCRIPTION
blank hide logo
def use default logo
cuslogo
url use image from URL
logourl <text string shorter than 80 characters> URL of image for logo
linkurl <text string shorter than 80 characters> URL to link when clicking on logo
blank hide background image
def use default background
cusback
url use image from URL
backurl <text string shorter than 80 characters> URL of image for background
fcolor <0 ~ 15> color index for font
bcolor <0 ~ 15> color index for background