Vision Fitness T9700 User Manual
Page 2
1
STEP
2
STEP
5
STEP
To avoid possible damage to this Platform Treadmill, please follow these assembly steps in the correct order. Before proceeding
though, find your new Platform Treadmill’s serial number, located on the underside of the main frame, and enter here:
Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records.
Be sure to read your Owner’s Guide before using your new Platform Treadmill.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE:
It is recommended that you apply grease to the threads of each bolt as you assemble your Platform Treadmill, to prevent loos-
ening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt.
A s s e m b l y
G u i d e
T9200, T9300HRT, T9500HRT, T9500HRT Ortho
AND T9600HRT Comfort AND T9700 Series
PLATFORM TREADMILLS
3
STEP