Vivotek NR7401 User Manual
Page 12
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
12 - User's Manual
WAN Settings Configuration
If you want to access the Network Video Recorder over the Internet, please go to
Configuration
> Network to assign a WAN IP address (public IP) for NR7401. There are three ways to get a
WAN IP address:
Privite DHCP (Dynamic IP), Static IP address, and PPPoE (DSL)�
Internet connection with private DHCP (dynamic IP)
Choose this connection type
to automatically obtain a dynamic IP address assigned by a DHCP
server� Please follow the steps below to verify the settings:
1� Go to
Configuration > Network� Click LAN > Get IP address automatically.
2� Click
Apply to enable the settings�
3. If your computer is in the same domain with the WAN IP address, then you can use VIVOTEK
Installation Wizard 2 (IW2) to search for the Network Video Recorder easily.
Please follow the steps below to run IW2:
a. Install the IW2 under the Software Utility directory from the software CD.
Double-click the IW2 shortcut on your desktop to launch the program.
b� The program will conduct analyses on your network environment�
After your network environment is analyzed, please click Next to continue the program.
c� The program will start search for all VIVOTEK devices in the same LAN�