Vivotek NR7401 - Manual (Page 30)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
30 - User's Manual
This page allows Administrator to add a new Recording Policy/Recording Type or modify
an existing recording policy/Recording Type for the Network Video Recorder� The user can
configure up to 4 recording policies.
■ Please configure the following items to add a new Recording Policy/Recording Type:
Recording Policy
Select Policy: Select Add new�
Name: Enter a descriptive name for the new recording policy�
Save Scheduled Recording: Select a time period (1 Hour, 1 Day, 1 Week, 2 Weeks, 30 Days, or 90 Days).
Motion Recording: Select a time period (1 Hour, 1 Day, 1 Week, 2 Weeks, 30 Days, or 90 Days).
Pre-motion Time: Select a time period (0 Seconds, 10 Seconds, 30 Seconds, 1 Minute, or 5 Minutes)�
Post-motion Time: Select a time period (30 Seconds, 1 Minute, or 5 Minutes)�
Save Alarm Recording: Select a time period (1 Hour, 1 Day, 1 Week, 2 Weeks, 30 Days, or 90 Days).
Pre-alarm Time: Select a time period (0 Seconds, 10 Seconds, 30 Seconds, 1 Minute, or 5 Minutes)�
Post-alarm Time: Select a time period (30 Seconds, 1 Minute, or 5 Minutes)�
Save Manual Recording: Select a time period (1 Hour, 1 Day, 1 Week, 2 Weeks, 30 Days, or 90 Days).
Recording Type
Disabled: No recording�
Event Mode: Start to record if Motion triggered or Alarm triggered within the recording schedule� Please
note that the priority of Alarm trigger would be higher than Alarm trigger�
Continuous Mode: Record all video within the recording schedule�
Following is an example of recording policy:
■ Click Save to take effect�