Vivotek NR7401 User Manual
Page 6
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
6 - User's Manual
Status LED
The LED indicates the status of the Network Video Recorder�
LED
Status
Indication
Power
Green
Power on
Off
Power off
POE
Green
Normal
Off
Power off / POE fail
Status
Green
Normal
Blinking red
Upgrading firmware
HDD (Hard disk)
Blinking green
Hard disk is accessed
Red
Hard disk full or error
WAN
On
With connection
Off
No connection
Blink
Activity on WAN port
LAN1
On
With connection
Off
No connection
Blink
Activity on LAN port 1
LAN2
On
With connection
Off
No connection
Blink
Activity on LAN port 2
LAN3
On
With connection
Off
No connection
Blink
Activity on LAN port 3
LAN4
On
With connection
Off
No connection
Blink
Activity on LAN port 4
Hardware System Requirement
Computer:
■ Microsoft Windows XP Professional SP2 or above
■ Internet Explorer 6�0 or later
Hard disk:
SATA hard drive for up to 1TB
Hardware Reset
There is a indented reset button on the back panel of the Network Video Recorder� It is used to
reboot the Network Video Recorder or restore the Network Video Recorder to factory default�
Sometimes rebooting the Network Video Recorder could set it back to normal state� If the
problems remain after rebooted, restore the Network Video Recorder to factory default and
install again�