Vivotek NR7401 - Manual (Page 21)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 21
Network (WAN)
This page allows user to configure WAN configuration for the Network Video Recorder. It
contains two columns: “LAN” and “DHCP Server�“ Please refer to page 12~15 for detailed
settings�
LAN / DHCP Server
This page allows Administrators to configure network connection in LAN for the Network
Video Recorder. It contains two columns: “LAN” and “DHCP Server.“ When in LAN, the default
IP Address for the Network Video Recorder is 192�168�100�1 � The default Subnet Mask is
255�255�255�0�
If you set up the network video recorder in LAN and link its LAN Port to network cameras
and computer as the picture shows below, the DHCP server of network video recorder will
automatically assign IP address to those linked devices� (192�168�100�2 ~ 192�168�100�254)
NOTE
► The starting and ending address of the DHCP server must be in the same subnet as the IP address of
the LAN interface of the NR7401�
RESET
LAN4 LAN3 LAN2 LAN1 WAN
1 2 3 4 5 6 7 8 9 10 11 12
Activity
Power/MIC
LAN
LAN
LAN
IP address: 192.168.100. 1
Subnet mask: 255.255.255.0
IP address: 192.168.100. 2
Subnet mask: 255.255.255.0
IP address: 192.168.100. 3
Subnet mask: 255.255.255.0
IP address: 192.168.100. 4
Subnet mask: 255.255.255.0