Vanguard Heating Gas Log Heater - Manual (Page 21)

21
103515
INSTALLING
Continued
For Golden Oak or Birch Models
It is very important to install the logs exactly as instructed. Do not modify logs.
Only use logs supplied with heater.
1. Place one-piece log set on grate to fit as illustrated in Figure 19. Make sure
middle section at bottom of log set is seated into "U"-shaped cutout in center of
chassis (see Figure 19). Log will fit securely on chassis.
IMPORTANT: Make
sure log does not cover any burner parts.
2. Place lava rock around base of heater.
Figure 19 - Installing Golden Oak or Birch One-Piece Log Set
Figure 20 - Installing Golden Oak or Birch One-Piece Log Set (Top View)
One Piece Log Set
Burner
One Piece Log Set
Burner
Middle Section at
Bottom of Log Set
"U"-shaped Cutout
in Chassis
Chassis