Troubleshooting – Vision Fitness U70 User Manual
Page 32
28
G
EN
ER
AL
TROUBLESHOOTING
Our Bikes are designed to be reliable and easy to use. If, however, you
have a problem, these troubleshooting steps may reveal the cause.
PROBLEM: The console does not light up.
SOLUTION:
Make sure you are pedaling the Bike.
SOLUTION:
Make sure the wire harness is plugged into the back of the
console.
PROBLEM:
The Bike is making a
clicking noise.
SOLUTION:
Using the pedal
wrench supplied with your Bike,
remove both the left and right
pedals, apply grease to the
threaded portion and reassemble
the pedals onto the Bike. Make
sure the pedals are tight.
SOLUTION:
Make sure the pedal straps or your shoe laces are not hitting
the side cover.
SOLUTION:
Assure seat adjustment is tight (see pages 10 and 11).
PROBLEM:
The Bike makes a squeaking or creaking noise.
SOLUTION:
Check and tighten all hardware.
U70_091104.indd 28
11/4/09 11:31 AM