Visioneer MX 230 - Manual (Page 26)

20 V ISIONEER MX 230 D IGITAL C AMERA U SER ’ S G UIDE
Flash: Cycles through settings for the flash.
■ Auto: The camera determines when the flash is needed.
■ On: The flash is always on, whether needed or not.
■ Red-eye reduction: Reduces the appearance of red-eye
in photos caused by flash reflection off of the subject’s eyes.
The camera flashes quickly before the picture is taken to
reduce the occurrence of red-eye.
■ Off: The flash is off, whether needed or not.
White Balance: Cycles through settings for white balance.
■ Auto: Camera determines the white balance setting.
■ Daylight: Used in bright daylight, to reduce the effect of
whitewashed pictures.
■ Shade: Used in the shade, or if the picture is dark.
■ Incandescent light: Used under incandescent light.
■ Fluorescent light: Used under fluorescent light.
Telephoto: Narrows the field framed by the camera’s lens.
■ When you press the Telephoto button, the optical zoom is
activated. The field is narrowed from x1.0 to x3.0 in
increments of .25. If you continue to press the Telephoto
button the digital zoom is activated. The digital zoom
narrows the field from x1.0 to x3.0 in increments of .2.
Wide Angle: Widens the field framed by the camera’s lens.
WB
T
W