Visioneer MX 230 - Manual (Page 47)

C ONNECTING TO A C OMPUTER 41
6. When installation is finished, turn off the camera.
To install your camera for use as a PC camera:
1. Set the camera’s Mode dial to PC.
2. Turn on the camera.
3. Your computer detects the connection to the camera and
initiates installation of the new hardware.
■ Depending on the Windows operating system installed on
your computer, the installation may proceed automatically,
or you may be asked to follow the instructions in a new
hardware installation wizard.
4. When installation is finished, turn off the camera.
Note: If your computer is running the Windows XP operating
system, you may see a screen indicating that the camera has not
passed Windows Logo testing. If this screen appears, click
Continue Anyway. The function of your camera is not affected.
Note: If your computer is running the Windows XP operating
system, you may see a screen indicating that the camera has not
passed Windows Logo testing. If this screen appears, click
Continue Anyway. The function of your camera is not affected.