Visioneer MX 230 - Manual (Page 38)

32 V ISIONEER MX 230 D IGITAL C AMERA U SER ’ S G UIDE
1. From the Set Up menu, press the Up or Down buttons to
select Video Out, and then press the Display button.
2. On the Video Out screen, press the Up or Down to select
NTSC or PAL, and then press the Display button.
PC M ODE
PC mode is used to allow your camera to be used as a PC camera.
After connecting your camera to your PC via the USB port, you
can use your camera to create videos and snapshots directly on your
computer.
For details, see “Connecting to a Computer” on page 37 and
“Using Your Camera as a PC Camera” on page 46.
To use your camera as a PC camera:
1. Turn the Mode dial to PC.
2. Use the supplied USB cable to connect the camera to your PC.
Note: The NTSC format is typically used in North America
and the PAL format is typically used outside of North America.