VBrick Systems VOD-W Server VBrick v4.2.1 User Manual
Page 79
Adding Storage to 1950/2950 Servers
VOD-W Admin Guide
71
8. The next photo shows Dell 1950 back view with PERC 5/E external RAID connected.
9. The next photo shows MD1000 back view with PERC 5/E external RAID connected.
10. VOD-W setup for both Dell 1950 and 2950 Servers.
Connect the SCSI cable from the DM1000 to SCSI 0 port connector on the 1950/2950;
this is bottom left connector on the two-port SCSI card (shown below). If you are
connecting a second external DM1000 array, then connect the SCSI cable from the Out
port of the first external to the In port of the second external on the right from the back
storage array. If you are connecting a third external DM1000 array, then connect the
SCSI cable from the Out port of the second external to the In port of the third external
on the right from the back storage array.