Verizon NSQ412 - Manual (Page 48)

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 45
or
Press the [SAVE] to confirm the setting.
The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Prime Line Preference
Programming
The Prime Line is the one that has the
highest priority to go off-hook when the
station is idle and you lift the handset,
press the [SPEAKER] or [HEADSET]
keys. To program the Prime Line
Preference, enter the programming mode
and turn the [JOG] knob until the display
shows PRIME LINE. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
to select the Prime Line. Rotate the
[JOG] knob to change the selection. For
example, the LCD will display:
•
•
Press the [SAVE] key to confirm the
selection. For example, the LCD will dis-
play:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Line Group Programming
This setting allows lines 2, 3 and 4 to
have different telephone numbers for dif-
ferent stations (non-square). Stations
sharing the same telephone numbers on
a line need to be programmed as part of
the same group. To program the Line
Group, enter the programming mode and
turn the [JOG] knob until the display
shows LINE GROUP. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
programming the Line Group. Rotate the
[JOG] knob to change the CO Line. The
LCD will display:
•
•
L 3 U S A G E
= O f f
T u r n D i a l
S A V E : s a v e ?
L 3 U S A G E
= O f f
P r o g r a m m e d !
P R I M E L I N E
T u r n D i a l
> :
e n t e r
L I N E G R O U P
T u r n D i a l
> :
e n t e r
L 2 G R O U P
T u r n D i a l
> :
e n t e r
P R I M E L I N E
= L 1
T u r n D i a l
S A V E : s a v e ?
P R I M E L I N E
= L 4
T u r n D i a l
S A V E : s a v e ?
P R I M E L I N E
= L 3
P r o g r a m m e d !