Verizon NSQ412 - Manual (Page 50)

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 47
Tone or Pulse Dial Programming
The station can be set to dial in Tone or
Pulse. To program the Tone/Pulse dial,
enter the programming mode and turn
the [JOG] knob until the display shows
TONE/PULSE. The LCD will display:
Press the NAVIGATION [>] key to begin
programming the Tone/Pulse dialing.
Rotate the [JOG] knob to change the
selection. The LCD will display:
or
Press the [SAVE] key to confirm the
selection. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Flash Time Programming
The amount of time the station opens the
telephone line when the [FLASH] key is
pressed can be changed. To program the
Flash Time, enter the programming mode
and turn the [JOG] knob until the display
shows FLASH TIME. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
programming the Flash Time. Rotate the
[JOG] knob to change the selection. The
LCD will display:
•
•
Press the [SAVE] key to confirm the set-
ting. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
T O N E / P U L S E
T u r n D i a l
> :
e n t e r
F L A S H T I M E
T u r n D i a l
> :
e n t e r
F L A S H T I M E
= 0 . 1 s e c
T u r n D i a l
S A V E : s a v e ?
F L A S H T I M E
= 1 . 2 s e c
T u r n D i a l
S A V E : s a v e ?
F L A S H T I M E
= 1 . 2 s e c
P r o g r a m m e d ! T O N E / P U L S E
= T o n e
T u r n D i a l
S A V E : s a v e ?
T O N E / P U L S E
= P u l s e
T u r n D i a l
S A V E : s a v e ?
T O N E / P U L S E
= P u l s e
P r o g r a m m e d !