Verizon NSQ412 - Manual (Page 49)

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 46
Press the NAVIGATION [>] key to select
the CO Line. Rotate the [JOG] knob to
change the Line Group. The LCD will dis-
play:
•
•
or
NOTE: Two different lines on the same
station cannot belong to the same
Group. That selection will not be avail-
able during programming.
Press the [SAVE] key to confirm the
selection. For example, the LCD will dis-
play:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Auto-Mute Programming
The Auto-Mute feature determines
whether a paged station’s microphone is
automatically enabled or disabled. To
program the Auto-Mute, enter the pro-
gramming mode and turn the [JOG] knob
until the display shows AUTO-MUTE.
The LCD will display:
Press the NAVIGATION [>] key to begin
programming the Auto-Mute. Rotate the
[JOG] knob to change the selection. The
LCD will display:
or
Press the [SAVE] key to confirm the set-
ting. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
L 4 G R O U P
T u r n D i a l
> :
e n t e r
A U T O - M U T E
T u r n D i a l
> :
e n t e r
A U T O - M U T E
= O n
T u r n D i a l
S A V E : s a v e ?
A U T O - M U T E
= O f f
T u r n D i a l
S A V E : s a v e ?
A U T O - M U T E
= O f f
P r o g r a m m e d !
L 4 G R O U P
= L 0 4
T u r n D i a l
S A V E : s a v e ?
L 4 G R O U P
= L 1 5
T u r n D i a l
S A V E : s a v e ?
L 4 G R O U P
= P R V
T u r n D i a l
S A V E : s a v e ?
L 4 G R O U P
= L 1 2
P r o g r a m m e d !