Verizon NSQ412 - Manual (Page 51)

NSQ412 Four-Line Caller ID Telephone Owner’s Manual 48
Hold Reminder Programming
The station will emit a reminder tone
every 30 seconds when it put a line on
hold. This can be disabled. To program
the Hold Reminder, enter the program-
ming mode and turn the [JOG] knob until
the display shows HOLD REMINDER.
The LCD will display:
Press the NAVIGATION [>] key to begin
programming the Hold Reminder. Rotate
the [JOG] knob to change the selection.
The LCD will display:
or
Press the [SAVE] key to confirm the
selection. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
New CID LED Programming
The New CID LED feature can be dis-
abled or enabled. To program the New
CID LED, enter the programming mode
and turn the [JOG] knob until the display
shows NEW CID LED. The LCD will dis-
play:
Press the NAVIGATION [>] key to begin
programming the New CID LED. Rotate
the [JOG] knob to change the selection.
The LCD will display:
or
Press the [SAVE] key to confirm the set-
ting. The LCD will display:
After approximately five seconds, the dis-
play will return to the highest level of the
current setting.
Area Code Programming
There is one location for a Home Area
Code. The station uses it to remove the
area code from the Caller ID number dis-
played in the LCD. It usually is pro-
grammed with the area code that phone
is located in.
H O L D R E M I N D E R
T u r n D i a l
> :
e n t e r
N E W C I D L E D
T u r n D i a l
> :
e n t e r
H O L D R E M I N D E R
= O n
T u r n D i a l
S A V E : s a v e ?
N E W C I D L E D
= O n
T u r n D i a l
S A V E : s a v e ?
N E W C I D L E D
= O f f
T u r n D i a l
S A V E : s a v e ?
N E W C I D L E D
= O f f
P r o g r a m m e d !
H O L D R E M I N D E R
= O f f
T u r n D i a l
S A V E : s a v e ?
H O L D R E M I N D E R
= O f f
P r o g r a m m e d !