VocoPro GIG-STAR - Manual (Page 25)

AM/FM Tuner Descriptions
The AM/FM Tuner can be controlled either on the front panel or via the remote control.
1. INPUT SELECTOR - Use this button to turn on the radio. This button toggles through all the INPUT channels (DISC,
TUNER, AV1, AV2) for available INPUT SOURCES. Press the button until the TUNER light is on.
2. Preset Buttons - Use these buttons to program and select the radio preset stations. To program a station, hold
down a number button for 3 seconds while on the desired station. The screen will display the number once it has been
programmed. To jump to a preset station, simply press that number button.
3. AM/FM button - Use this button to toggle between AM and FM radio modes.
4. AUTO button - The AUTO search button automatically scans through all stations and stops when a station’s signal is
strong and clear.
5. < PRESET > buttons - Use these buttons to search through the stations that you have programmed as presets. Use
the < button to search backwards and the > button to search forwards.
6. < SEARCH > buttons - Use these buttons to manually search through all radio stations. The tuner must be set to FM
mode to search through FM radio stations and it must be set to AM mode to search through AM radio stations. Hold
the preset buttons down to activate rapid scan.
7. ST/MO button - Select between Stereo (ST) and MONO (MO) audio output modes. If your desired station is receiving
poor reception, try setting this to MO.
19