VocoPro GIG-STAR - Manual (Page 27)

LANGUAGE SETUP
Use this menu to set language preferences for each of these functions. Use the DIRECTION keys to make a selection and press ENTER to confirm
your choice.
1. OSD (On Screen Display) LANGUAGE for remote functions, etc. Choose between English or Chinese.
2. AUDIO LANGUAGE. This feature is dependent on the options included with each individual disc. Choose from the list provided.
3. SUBTITLE LANGUAGE. This feature is dependent on the option included with each individual disc. Choose from the list provided.
4. MENU LANGUAGE. This feature is dependent on the options included with each individual disc. Choose from the list provided.
AUDIO SETUP
1. AUDIO OUT
With the GIG STAR, you can output standard analog audio simultaneous with digital output by using the RCA L/R outputs and Coaxial output. When
connecting the GIG STAR to an external sound system with digital inputs, choose between a) SPDIF/OFF to completely bypass digital audio, SPDIF/
RAW for Dolby 5.1 or SPDIF/PCM for digital, high fidelity stereo (2-channel) output depending on your external audio components and connections.
2. KEY CONTROL
This feature functions exactly the same as the KEY CONTROL buttons on the remote control, but with a virtual vertical “fader” instead of a left-right
display. Use the DIRECTION keys to locate the fader bar, raise (#/sharp) or lower (b/flat) the output of the disc in half-step increments.
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANGUAGE
SUBTITLE LANGUAGE
MENU LANGUAGE
EXIT SETUP
LANGUAGE SETUP SCREEN
AUDIO SETUP
AUDIO OUT
KEY
AUDIO SETUP SCREEN
Setting the Preferences cont.
21