Vizio TL-WR641G - Manual (Page 27)

TL-WR641G 108M Wireless Router User Guide
- 19 -
manually. After a specified period of inactivity (Max Idle Time), the router will disconnect
from the Internet connection, and you will not be able to re-establish your connection
automatically as soon as you attempt to access the Internet again. To use this option, click
the radio button. If you want your Internet connection to remain active at all times, enter "0"
in the Max Idle Time field. Otherwise, enter the number time in minutes that you wish to
have the Internet connecting last unless a new link is requested.
) Note:
Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time,
since some applications are visiting the Internet continually in the background.
Click the Connect button to connect immediately. Click the Disconnect button to disconnect
immediately.
Click the Advanced Settings button to set up the advanced option, the page shown in Figure
4-7 will then appear:
Figure 4-7
¾ Packet MTU - The default MTU size is 1480 bytes, which value is usually fine. For some
ISPs, you need modify the MTU. This should not be done unless you are sure it is
necessary for your ISP.
¾ Service Name/AC Name - The service name and AC (Access Concentrator) name, these
should not be configured unless you are sure it is necessary for your ISP.
¾ ISP Specified IP Address - If you know that your ISP does not automatically transmit your
IP address to the router during login, click “Use the IP Address specified by ISP” check
box and enter the IP Address in dotted-decimal notation, which your ISP provided.
¾ Detect Online Interval - The default value is 0, you can input the value between 0 and 120.