Vizio TL-WR641G User Manual

Page 32

Advertising
background image

TL-WR641G

108M Wireless Router User Guide

- 24 -

fields are case-sensitive.

¾

Dynamic IP/ Static IP – Choose either as you are given by your ISP.

Click the Connect button to connect immediately. Click the Disconnect button to

disconnect immediately.

¾

Connect on Demand - You can configure the router to disconnect from your Internet

connection after a specified period of inactivity (Max Idle Time). If your Internet connection

has been terminated due to inactivity, Connect on Demand enables the router to

automatically re-establish your connection as soon as you attempt to access the Internet

again. If you wish to activate Connect on Demand, click the radio button. If you want your

Internet connection to remain active at all times, enter 0 in the Max Idle Time field.

Otherwise, enter the number of minutes you want to have elapsed before your Internet

connection terminates.

)

Note:

Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time,

since some applications is visiting the Internet continually in the background.

¾

Connect Automatically - Connect automatically after the router is disconnected. To use

this option, click the radio button.

¾

Connect Manually - You can configure the router to make it connect or disconnect

manually. After a specified period of inactivity (Max Idle Time), the router will disconnect

from your Internet connection, and you will not be able to re-establish your connection

automatically as soon as you attempt to access the Internet again. To use this option, click

the radio button. If you want your Internet connection to remain active at all times, enter "0"

in the Max Idle Time field. Otherwise, enter the number in minutes that you wish to have

the Internet connecting last unless a new link is requested.

)

Note:

Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time,

since some applications is visiting the Internet continually in the background.

8. If you choose PPTP, you should enter the following parameters (Figure 4-12):

Advertising