Vizio TL-WR641G - Manual (Page 53)

TL-WR641G 108M Wireless Router User Guide
- 45 -
Figure 4-36
¾ Enable IP Address Filtering - set IP Address Filtering is enabled or disabled. There are
two default filtering rules of IP Address Filtering, either Allow or Deny passing through the
router.
¾ Enable Domain Filtering - set Domain Filtering is enabled or disabled.
¾ Enable MAC Filtering - set MAC Address Filtering is enabled or disabled. You can select
the default filtering rules of MAC Address Filtering, either Allow or Deny accessing the
router.
4.8.2 IP Address Filtering
The IP address Filtering feature allows you to control Internet Access by specific users on your
LAN based on their IP addresses. The IP address filtering is set on this page, Figure 4-37: