Viper 700 ESP - Manual (Page 12)

11
© 2000 Directed Electronics, Inc.
To temporarily turn off the arm or disarm chirps, use Silent Mode ™ .
Simply press for less than one second before arming or dis-
arming the system, and the confirmation chirp(s) will be
eliminated for that one operation only. If you want the
arm/disarm confirmation chirps turned off permanently, your
dealer can do this for you.
NOTE: The Warn Away ® response to lighter impacts is bypassed if the
system is armed using Silent Mode. This ensures that no chirps will
be emitted by the siren in an area you want chirp-free. The system is still
fully capable of triggering. Only the Warn Away
® response is bypassed.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your remote! Just press
for 1 second, and you will enter Panic Mode. The siren will
sound and the parking lights will flash for the programmed siren
duration. To stop Panic Mode at any time, press , , or
on the remote.
You can prevent your security system from automatically arming
and triggering by using Valet ® Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
system will not arm, even with the remote, but all convenience
functions (door locks, trunk release, etc.) will continue to work
normally. The security system must be disarmed in order to enter
Valet ® Mode
Panic Mode
Silent Mode