Viper 700 ESP - Manual (Page 21)

20
© 2000 Directed Electronics, Inc.
■ Automatic Engine Disable (AED) on or off: This feature is
designed to prevent the vehicle from being stolen at all
times, regardless of whether or not the alarm is armed. When
AED is programmed on, the LED will flash slowly (one-half its
normal armed rate) once the ignition key is turned off, to
indicate that the AED arming cycle has begun. Thirty seconds
later, the AED feature is active and will prevent the engine
from being started. In order to disarm AED, you must press
the disarm button on the remote. If the remotes are lost or
stolen, you can also disarm the AED feature by turning the
siren key to the off position. (Refer to the Disarming Without
a Transmitter section of this guide.) AED is disabled when the
system is in Valet ® Mode.
■ Full trigger response 25 or 50 seconds: This determines how
long the full triggered sequence lasts. Some regions have
laws regulating how long a security system can sound before
it is considered a nuisance. If your installer is programming
the security system with the DEI Bitwriter or a PC
Programmer, the full triggered response can be programmed
for any duration ranging from 1 to 180 seconds.
■ Nuisance Prevention ® Circuitry (NPC ™ ) on or off: Please refer
to the NPC section of this manual for a complete explanation
of how NPC operates. If NPC is programmed off, the security
system will respond to inputs from any sensor indefinitely.
NOTE: Because many regions have laws regulating security systems, pro-
gramming NPC off may cause your system to violate state laws.