Viper 700 ESP - Manual (Page 18)

17
© 2000 Directed Electronics, Inc.
Owner Recognition
Owner Recognition is a feature available exclusively from DEI ® .
Using a DEI ® Bitwriter hand-held programming tool, your dealer
can program many of the system settings. The programmer makes
it possible to program different settings for each transmitter that
is used with the system. Then, whenever a specific transmitter is
used, the system will recall the settings assigned to that trans-
mitter. Owner Recognition lets up to four users of the system have
different settings that meet their specific needs. It is almost like
having four separate alarms in your vehicle, one for each user.
NOTE: Owner Recognition cannot be programmed without a Bitwriter ™
and the necessary software. Check with your dealer for more information.
Rapid Resume Logic
This DEI ® system will store its current state to non-volatile
memory. If power is lost and then reconnected the system will
recall the stored state from memory. This means if the unit is in
Valet ® Mode and the battery is disconnected for any reason, such
as servicing the car, when the battery is reconnected the unit will
still be in Valet Mode. This applies to all states of the system
including arm, disarm, and Valet Mode.