Freezer drawer removal – Viking F20481 User Manual

Page 12

Advertising
background image

23

1

Pull drawer open to full extension.

2

Loosen the four screws attaching the drawer glides to

the drawer front on both sides.

NOTE: Loosen screws three to four turns. Keep the

screws in the drawer front.

3

4

Lift drawer front upward and off the screws.

Push both rails back in.

Freezer Drawer Removal

(Bottom-Mount)

22

6

7

Unscrew 5/16” hex head screws from left top hinge.

Retain all screws for later use.

Lift left side refrigerator door, along with top hinge,

from center hinge pin.

8

Remove screws to remove right and left hinges.

Retain all screws for later use.

4

5

Lift right side refrigerator door from center hinge pin.

Remove door closure from center hinge pin on the

right side. Retain for later use.

Disconnect wire harness on top of left side refrigerator door

top hinge. Release two-pin connector by pressing junction

point with a flat blade screwdriver or fingernail. Green ground

wire remains attached to the hinge.

3

Unscrew 5/16” hex head screws from right top hinge

and remove hinge. Retain all screws for later use.

Advertising